IDX 7505

IDX 7505

FREE SHIPPING U.S. 48

In house technical support provided for this Trinamic product.

Datasheet

IDX_manual.pdf 
(643.28kB 17-Oct-13)

Product Details

Description

The IDX 7505 is a small and rugged step-/ direction stepper motor driver system with a supply voltage of up to 75V and up to 5A RMS motor coil current. The parameters of the IDX 7505 like motor current and µStep resolution can be changed easily using the RS-485 interface with an ASCII protocol (e.g. with Hyperterminal). Also the firmware of the module can be updated via the serial interface. All settings are stored in an internal EEPROM, so that no bus system is required in the application. The module is fully protected and comes with a stand-alone reference search feature, using the integrated reference switch input or StallGuard™.

The motor, switches and power supply can be connected easily with screw terminal connectors. The housing is based on a thick aluminium plate which is used as a heatsink.

 

 

IDX 7505

Interfaces: RS485, Step / Direction
No. Axes: 1
Phase Current, RMS: 5A
Phase Current, peak: 7A
Product State: active
Microstep Resolution: 1...256
Supported Motor Type: Stepper
chopSync™
stallGuard™
Motor Supply: 12...75V
Height: 24mm
Length: 65mm
Width: 64mm

 

Downloads

 

 

Application Notes

 FileSizeModified
IDX_V115.hex 27.98kB 17-Oct-13
IDX_V117.hex 28.94kB 17-Oct-13
TMCM013Boot.exe 486.5kB 17-Oct-13
 

Datasheet

 FileSizeModified
IDX_manual.pdf 643.28kB 17-Oct-13
 

Documentation

 FileSizeModified
IDX-7505_ShortSpec.pdf 254.06kB 17-Oct-13
IDX_manual.pdf 643.28kB 17-Oct-13
IDX_start.pdf 186.23kB 17-Oct-13
IDX_start_deutsch.pdf 174.93kB 17-Oct-13
tmcm_idx_kurzanleitung.pdf 18.29kB 17-Oct-13
tmcm_idx_short_guide.pdf 16.21kB 17-Oct-13