USB-2-X v2.0

FREE SHIPPING U.S.48 - Now in Stock.

In house technical support for this Trinamic product.

The Engineer´s "Swiss Army Knife" for Serial Bus Systems

The USB-2-X device is an interface converter that is equipped with a CAN interface, an IIC interface, a LIN interface, an SPI interface and an RS485 interface. It is connected to the PC via an USB interface. The USB-2-X device is mainly designed for use with some of the Trinamic evaluation kits, but it can also be used in any other purpose where a connection between a PC and a CAN interface, an IIC interface, a LIN interface, an SPI interface or an RS485 interface is needed. The software supplied with this product can be used with every version of the Windows operating system that supports USB (Windows 98, Windows ME, Windows 2000, Windows XP). The USB-2-X device can be connected to USB 1.1 or USB 2.0 hosts and supports the full bitrate of 12MBit/s. It is fully powered by the bus, so no extra power supply is needed.


Interfaces: USB host interface

  • Connection to USB 1.1 or USB 2.0 hosts possible (a cable is included)
  • USB full speed device (12MBit/s)
  • Bus powered (no extra power supply needed)

Interfaces: CAN

  • CAN 2.0A and 2.0B compatible
  • Standard (11 bit) and extended (29 bit) identifier possible
  • Transceiver: ISO 11898 compatible
  • Maximum bit rate: 1MBit/s
  • 120 ohms termination resistor can be activated with a jumper

Interfaces: LIN

  • Compatible with LIN specification rev 1.3
  • up to 20kBit/s
  • Industry standard transceiver

Interfaces: I²C

  • Single master
  • up to 400kBit/s up to 400kBit/s
  • 7-bit addressing

Interfaces: RS485

  • half duplex communication mode
  • industry standard 75176 transceiver
  • 2400, 9600 and 19200 bps supported


  • RoHS compliant latest by 1 July 2006





  File Size Modified
USB-2-X_manual.pdf 322.22kB 17-Oct-13


  File Size Modified
USB-2-X_manual.pdf 322.22kB 17-Oct-13
USB-2-X_protocol.pdf 343.33kB 17-Oct-13
USB2X_ShortSpec.pdf 311.54kB 17-Oct-13
USB2X_V10.pdf 34.61kB 17-Oct-13


  File Size Modified
FTD2XX.dll 68kB 17-Oct-13
FTD2XX.sys 25kB 17-Oct-13
FTD2XXUN.EXE 397kB 17-Oct-13
FTD2XXUN.INI 59B 17-Oct-13
USB2X.INF 2.38kB 17-Oct-13
USB2X.exe 706kB 17-Oct-13 1.16MB 17-Oct-13 259.63kB 17-Oct-13
usb2x_v101.s19 9.88kB 17-Oct-13
usb2x_v210.s19 13.1kB 17-Oct-13
usb2x_v211.s19 13.17kB 17-Oct-13